Timz DMR Repeaters
Starting June 7, 2025
the East repeater will switch from 440 mhz to 2 meter operation.
East will now be on these frequencies
147.390 out
147.990 in
same CC 13
Detailed video link near the bottom of this page
To talk thru the East repeater via RF (starting June 7), your East channels will need to be updated. I have a video showing what needs done... at the bottom of this page.
What changes: The receive and transmit frequency for East repeater memory channels (note: the new 2m East uses the same CC as the original). Those are the only two fields (RX freq, TX freq) that will need changed.
What doesn't change: Channels for the West repeater, channels you talk to Hot Spots, channels you talk to other DMR repeaters (other than East), DMR simplex channels, and analog channels
How-To Video
Click HERE to watch a video (with audio) showing how to make changes for Anytone DMR radios. If your radio is a different mfgr, you still might benefit from watching it.
Note: my channel numbers (in the video) will probably not coorelate to yours.
Contact Repeater Administrators
Timz
DMR Repeaters
