Timz DMR Repeater
Below is a WAV file of a comparison test between DMR digital and Analog.
The Test Setup
KB8PMI was using an Anytone 878 radio on a stationary antenna at his QTH. He had two channels programmed (one channel DMR only, the other analog only) to access Timz Hytera DMR repeater which was operating in MIXED A & D mode. N8NQH was at his QTH recording what was heard over the repeater. The first transmission was via DMR - followed by a second transmission using analog mode on his radio. Both transmissions were through the same repeater - from the same radio/antenna/TX power setting:
click HERE to listen to the comparison
back Contact Repeater Administrators